Sony CPD-17F03 - Manual (Page 4)

4
Adjustments
A number of digital controls are provided to allow you to
optimize the display parameters to your preferences.
You can adjust the picture to your preferences by following
the procedure described below.
You can adjust all items on the OSD (On Screen Display).
POWER
SAVING
Push this part to open the control panel cover.
p When the limit value is reached, the POWER SAVING
indicator will begin to flash.
p Adjustments will be stored automatically.
p The OSD automatically disappears 2 seconds after you
release the buttons.
Control Panel
Contrast
The adjustment data becomes the common setting for all
input signals.
1
Press the >+/– button.
The > OSD (On Screen Display) appears.
2
Press the >+/– button to adjust picture contrast.
+ ...for more contrast
– ...for less contrast
Horizontal centering
The adjustment data becomes the unique setting for the
input signal received.
1 Press the S∫/ı button.
The S OSD (On Screen Display) appears.
2
Press the S∫/ı button.
∫ ...to move right
ı ...to move left
Brightness
The adjustment data becomes the common setting for all
input signals.
1 Press the ¨+/– button.
The ¨ OSD (On Screen Display) appears.
2 Press the ¨+/– button to adjust picture brightness.
+ ...for more brightness
– ...for less brightness
Vertical centering
The adjustment data becomes the unique setting for the
input signal received.
1
Press the s◊/√ button.
The s OSD (On Screen Display) appears.
2
Press the s◊/√ button.
◊ ...to move up
√ ...to move down
POWER
SAVING
RESET