Sony UWP-C1/C2 - Manual (Page 17)

17
Half-rack size diversity
tuner (URX-R1)
1 POWER switch
Turns the power of the tuner ON or
OFF.
2 Antennas a/b
The angle of the antennas can be
adjusted manually.
3 MONITOR connector (phone
jack)
To monitor the tuner output, connect
the headphones to this connector and
adjust the monitor level with the
MONITOR control. Use either stereo
or monaural headphones.
4 MONITOR control
Turn to adjust the output monitoring
level (through the headphones).
5 + (+ selection) / – (– selection/
reset) buttons
Press these buttons to set the
reception channel and frequency.
6 Display section
A RF (radio frequency) indications
The number of dots indicates the RF
input level.
B AF (audio frequency) indication
Appears whenever the output audio
signal is stronger than the reference
level.
C GP (group)/CH (channel)
indication
Shows the reception channel group
and channel number. Each time you
press the SET button, the channel
indication changes as follows.
For details, see “Settings” on page
28.
Front panel
Rear panel
AF
RF
CH
A B
C