Sony UWP-C1/C2 - Manual (Page 26)

Attachment and Installation Procedures
26
• The buttons and display on the front
panel of the diversity tuner module
(URX-M1) may be damaged if they
are gripped too strongly. Always
hold the diversity tuner module by
the side.
• Do not put your fingers on the
connectors on the rear panel of the
diversity tuner module (URX-M1) or
into the slot on the unit into which
the diversity tuner module (URX-
M1) will be installed.
• Keep the diversity tuner module
(URX-M1) away from static
electricity.
Installing a diversity tuner
module (URX-M1) into an MB-
806A Tuner Base Unit
The MB-806A Tuner Base Unit can
accommodate up to 6 diversity tuner
modules (URX-M1).
1
Holding both sides of the diversity
tuner module (URX-M1), insert it
into the slot.
Push it in until you hear a click.
2
To install two or more diversity
tuner modules (URX-M1) , detach
the necessary number of blank
panels by pressing the top and
bottom tabs on each panel towards
each other and pulling the panel
out. Then do step 1 for each
module.
Removing a diversity tuner
module (URX-M1)
On the bottom panel of the MB-806A,
locate the lever corresponding to the
slot of the diversity tuner module
(URX-M1) to be removed and pull the
lever forward. The diversity tuner
module (URX-M1) is ejected from the
slot.
Lever