Sony RM-LJ302 - Manual (Page 15)

15
Using the Lists
If you selected the tape deck
Move the easy scroll key to display the information about
deck A or B.
Note
When the remote is programmed to control a non-Sony tape
deck, the following may occur:
— The information about deck B is not displayed and you
cannot switch between tape deck A and B.
— “TAPE A/B” is displayed and tape deck A and B switch
automatically each time you press the easy scroll key, etc.
If you selected the sub room
Move the easy scroll key to select the source for the sub
room, then press the key.
Note
Depending on the component you are using, "SUB ROOM" may
not be displayed.
Current sound field
Selecting a Sound Field
Do the procedure below to select a sound field from the
sound field list. Note that the sound fields contained in
each list will vary depending on the receiver.
1 Press SOUND FIELD.
The sound field list appears.
Stadium
Game
Jazz
2
Move the easy scroll key to select the sound field,
then press the key to enter the selection.
The display reverts back to the component
information after about ten seconds.
A display example
C.Studio A
C.Studio B
C.Studio C
To turn off the sound field
Move the easy scroll key to select either “S.Field OFF”,
“2ch Stereo”, or “Auto Format” in the sound field list in
the display. The sound field list that is displayed is
different depending on the model.