Sony XVM-R90D - Manual (Page 15)

15
When “Color” is selected;
Press (VOL) (+) : to increase colour intensity.
Press (VOL) (–) : to decrease colour intensity.
When “Hue”* 1 is selected;
Press (VOL) (+) : to increase the saturation.
Press (VOL) (–) : to decrease the saturation.
* 1 “Hue” is adjustable only when the NTSC
colour system is selected.
* 2 “CTR” appears only when is in the
centre of the bar.
When “Dimmer” is selected;
Press (VOL) (+) or (VOL) (–) to select “On.”
The brightness of the screen will be
adjusted automatically.
When “Video Adjust” is selected;
Press (VOL) (+) or (VOL) (–) to select
“Reset.”
“Picture,” “Brightness,” “Color,”
“Hue,” and “Dimmer” settings will be
reset to the factory preset level.
Color 32
Press + / – or MENU.
Hue CTR
Press + / – or MENU.
* 2
Dimmer; On
Press
+ / – or MENU.
Video Adjust;
Reset
Press
+ / – or MENU.
Notes
• When the output level is set to “High” in step 2,
noise may be heard.
• If noise is heard due to the interference with the
local FM broadcast, change the FM transmission
frequency.
• When the FM modulator is turned off, you
cannot change the frequency setting.
Changing the display settings
You can adjust the display settings manually if
the display is hard to see from the position
where you are seated.
1
Press (MENU) repeatedly to select the
desired item.
2
Press (VOL) (+) or (VOL) (–) to adjust to
the desired setting.
When “Picture” is selected;
Press (VOL) (+) : to increase the contrast.
Press (VOL) (–) : to decrease the contrast.
When “Brightness” is selected;
Press (VOL) (+) : to brighten the contrast.
Press (VOL) (–) : to darken the picture.
The setting value of the item
selected appears in this area.
Picture 32
Press
+ / – or MENU.
Brightness 32
Press + / – or MENU.
continue to next page t