Continued) – Sharp MD X5 User Manual
Page 15
14
(Continued)
H
H
H
H
H
APMS
(Automatic Programmable Music Selector)
1
Select the desired program source, CD or MD, by pressing the CD
H
or
MD
H
button.
2
Press the PROGRAM button.
I
"PRGM" will flash.
3
Use the track number input buttons to designate the desired track
number.
4
Repeat step 3 for any other tracks. Up to 20 tracks for MD or 32 tracks
for CD can be programmed.
I
The programmed playback order and the total playing time of the
programmed tracks will be automatically displayed, and only those
track numbers will appear in the music schedule.
I
If the total playing time of the programmed tracks exceeds 199 minutes
59 seconds, “– –:– –” will be displayed. In this case, the programmed
tracks are stored.
5
Press the CD
H
or MD
H
button.
6
Press the CD
06
or MD
06
button to start playback of the programmed
selections.
I
After all of the programmed tracks have finished playback, the unit will
automatically stop.
To add tracks to the APMS:
When a program has been entered ("PRGM" is flashing), perform step 3.
Additional tracks can be selected, and they will be stored after the last track
you entered.
To clear the programmed selections:
Press the CLEAR button while "PRGM" is flashing.
I
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed.
To cancel the APMS:
While the unit is stopped in the APMS mode, press the CLEAR button.
I
The program contents will be erased.
I
When you open the disc tray or a MiniDisc is removed, the APMS mode
will be canceled.
To check which tracks are programmed:
While the unit is stopped in the APMS mode, press the
5
or
4
button.
Notes:
I
It is not possible to insert an additional track between programmed
tracks that have already been entered.
I
Programming and canceling are not possible during playback or in the
pause mode.
You can make program selections from CDs with the main
unit.
1 Press the CD
H
button.
2 Hold down the TRACK button for at least 2 seconds.
3 Press the
5
or
4
button to select the track you want to listen to.
4 Press the TRACK button.
5 Repeat steps 3 and 4 for any other tracks.
6 Press the CD
H
button.
1,5
3
2
6
6
1,5
CLEAR
2
3
5
The last track number selected
Total playing time
Selected track numbers
*01-21
98.6.23, 10:09 AM
14