Sharp MD X5 User Manual

Page 23

Advertising
background image

22

H

H

H

H

H

Divide

1

Play the track which you wish to divide into two and press the MD

06

button at the point where you wish to divide the track.

I

The unit will enter the pause mode.

2

Press the NAME/TOC EDIT button, and then select “DIVIDE” using the

or

button.

3

Within 10 seconds, press the ENTER button.

I

To cancel the operation, press the MD

H

button.

4

Press the ENTER button again.

I

The tracks are divided, and the unit is stopped at the beginning of the
second of the two tracks.

I

The numbers of the tracks which come after the divided track are
automatically increased by one.

Note:

I

When a track which has been given a name is divided, the two new
tracks will have the same name and date. If the “TOC FULL” message
is displayed, the second track may not be given a name.

H

H

H

H

H

Combine

1

While in the stop mode, select the second of the two tracks you wish to
combine using the

5

or

4

button.

I

Start playing the second of the two tracks you wish to combine, and then
press the MD

06

button.

2

Press the NAME/TOC EDIT button, and then select “COMBINE” using
the

or

button..

3

Within 10 seconds, press the ENTER button.

I

To cancel the operation, press the MD

H

button.

4

Press the ENTER button again.

I

The two tracks are combined, and the unit is stopped at the beginning
of the combined track.

I

The numbers assigned to the tracks following the combined track are
automatically decreased by one.

When both tracks have a name:

I

When only the first track has a name

That name will be used.

I

When only the second of the two tracks has a name

That name will

be used.

I

When both tracks have a name

The name of the first track will be

used.

To combine two noncontiguous tracks:

(Example: the first and third tracks)
Move the third track to the second track using the MOVE function.
(Page 23)
Then, combine the first and second tracks using the COMBINE function.

Notes:

I

Tracks recorded from analog inputs cannot be combined with tracks
recorded from CDs or MDs using the digital inputs.

I

Tracks recorded in the stereo mode cannot be combined with tracks
recorded in the monaural long-play mode.

I

Tracks where either track’s recording time is less than 15 seconds may
not be combined.

(Continued)

1

2

2

3,4

1

2

3

4

1

2

2

3,4

1

2

3

4

*22-34

98.6.23, 10:10 AM

22

Advertising