Sharp MD X5 - Manual (Page 24)

23
H H H H H
Move
1
While in the stop mode, select the track you wish to move using the
5
or
4
button.
I
Start playing the track to be moved, and then press the MD
06
button.
2
Press the NAME/TOC EDIT button, and then select “MOVE” using the
▲ or ▼ button.
3
Within 10 seconds, press the ENTER button.
4 Select the direction to move the track using the
5
or
4
button.
I
To increase the track number ...
4
I
To decrease the track number ...
5
I
To cancel the operation, press the MD
H
button.
5
Press the ENTER button again.
I
The track is moved, and the unit is stopped at the beginning of the track.
Note:
I
When a track has been moved, the other tracks which are affected will
be assigned new track numbers automatically.
Programmed move:
1
Select the tracks you want to move and enter them into a program.
(Page 14)
2
Make sure that the “PRGM” indicator is lit, and then press the NAME/
TOC EDIT button.
3
Within 10 seconds, press the ENTER button.
I
To cancel the operation, press the MD
H
button.
4 Press the ENTER button again.
I
The tracks will be moved, and the programmed move mode will end.
Notes:
I
The track numbers that are not included in the programmed selections
will be put at the end of the new sequence.
I
When the same track has been entered into the program twice or more,
the last programmed position will have priority.
(Continued)
2
1,4
2
3,5
1
2
3
5
1
2
3,4
2
3
4
*22-34 98.6.23, 10:10 AM 23