Simplicity Manufacturing RZT22500BVE2 - Manual (Page 5)

250 Z & Javelin Series
7/2006 5 TP 300-5141-01-HZ-SN
Quick Setup List -
Page Setup Procedure Steps to Perform
6 Uncrating
❏ Remove crate & banding.
❏ Place transmissions in ROLL RELEASE position & roll off
skid.
7 Battery Activation &
❏ Charge the battery (Note: proceed with other setup steps
Installation while battery is charging).
❏ Install & secure battery.
8 Check Fluid Levels
❏ Fill & check Engine oil level.
❏ Reduce & check tire pressures
(Front tires 25 psi, rear tires 15 psi).
9 Mower Assembly
❏ Torque mower blade bolts.
9 Lubrication
❏ Lubricate all grease & oil points.
10 SAFETY CHECKS
❏ Check for LOOSE HARDWARE.
❏ Check all OPERATOR CONTROLS.
❏ Perform MOWER BLADE STOPPING CHECK.
(Blade must stop within 5 seconds!)
❏ Perform SAFETY INTERLOCK SYSTEM CHECK.
10 Burnish Electric Clutch
❏ Burnish electric clutch (run for 15 seconds, repeat 10 times).
❏ Repeat MOWER BLADE STOPPING CHECK.
(Blade must stop within 5 seconds!)