Sony STR-DB2000 - Manual (Page 47)

O
th
e
r O
p
era
tions
47 GB
Before you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
You can record on a MiniDisc or cassette tape
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
Notes
• You cannot record a digital audio signal using a
component connected to the analog TAPE OUT or
MD/DAT OUT jacks. To record a digital audio
signal, connect a digital component to the OPTICAL
MD/DAT OUT jacks.
• Sound adjustments do not affect the signal output
from the TAPE OUT or MD/DAT OUT jacks.
• The analog audio signals of the current input is
output from the TAPE OUT or MD/DAT OUT jacks.
• The signals input to the MULTI CHANNEL INPUT
jacks are not output from the TAPE OUT or MD/
DAT OUT jacks even when MULTI CH IN is being
used. The analog audio signals of the current or
previously used input are output.
Recording on a video tape
You can record from a VCR, a TV, or an LD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR if you need help.
1
Select the program source to be
recorded.
2
Prepare the component for playing.
For example, insert the laser disc you want
to record into the LD player.
3
Insert a blank video tape into the VCR
(VIDEO 1 or VIDEO 2) for recording.
4
Start recording on the recording VCR,
then start playing the video tape or
laser disc you want to record.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1 OUT
or VIDEO 2 OUT jacks.
• Make sure to make both digital and analog
connections to the TV/SAT or DVD inputs. Analog
recording is not possible if you make only digital
connections.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
• The analog audio signals of the current input are
output from the VIDEO 1 OUT or VIDEO 2 OUT
jacks.
• The signals input to the MULTI CHANNEL INPUT
jacks are not output from VIDEO 1 OUT or VIDEO
2 OUT jacks even when MULTI CH IN is being
used. The analog audio signals of the current or
previously used input are output.
Recording