The xli responds, Do the same for the ‘firmware’ (.bin) file, For example – Symmetricom XLi IEEE 1588 User Manual

Page 155: Then enter, Then do the same for the ‘file system’ (.fs) file, F100 bh <ip_address> <relative_path>/<file.bin, Burn host is ready<cr><lf, F100 bu, F100 bh <ip_address> <relative_path>/<file.fs

Advertising
The xli responds, Do the same for the ‘firmware’ (.bin) file, For example | Then enter, Then do the same for the ‘file system’ (.fs) file, F100 bh <ip_address> <relative_path>/<file.bin, Burn host is ready<cr><lf, F100 bu, F100 bh <ip_address> <relative_path>/<file.fs | Symmetricom XLi IEEE 1588 User Manual | Page 155 / 216 The xli responds, Do the same for the ‘firmware’ (.bin) file, For example | Then enter, Then do the same for the ‘file system’ (.fs) file, F100 bh <ip_address> <relative_path>/<file.bin, Burn host is ready<cr><lf, F100 bu, F100 bh <ip_address> <relative_path>/<file.fs | Symmetricom XLi IEEE 1588 User Manual | Page 155 / 216
Advertising
See also other documents in the category Symmetricom Clock: