Get ptp protocol settings, Where: for example, enter, Response (one of the following lines) – Symmetricom XLi IEEE 1588 User Manual
Page 137: For example, enter, Response, F131 b4 dhcp enable (or disable), F131 b<n> protocol<cr, F131 b4 protocol
XLi IEEE 1588 Clock
129
997-01510-03, Rev. C, 12/12/2006
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
where:
For example, enter:
F131 B4 DHCP ENABLE
(or DISABLE)
Response (one of the following lines):
OK - DHCP enable setting has been received and applied by the PTP Option Card<CR><LF>
ERROR - DHCP dynamic setting request has Failed.
ERROR - DHCP dynamic settings has Failed, using Static IP.
Get PTP Protocol settings
To get PTP protocol settings, use the following format:
F131 B<N> PROTOCOL<CR>
For example, enter:
F131 B4 PROTOCOL
Response:
F131 B4 PROTOCOL 27 ENABLE ENABLE<CR><LF>
To set the PTP protocol settings, use the following format:
F131 B<N><SP>PROTOCOL<SP><SI><SP><BS><SP><PS>
F
= ASCII character F
131
= unit function number
<SP>
= space
B
= ASCII letter to denote Option Bay number follows
<N>
= Option Bay Number, 1 through 4.
DHCP
= specify Dynamic Host Configuration Protocol command
<SET>
= ENABLE or DISABLE