Samsung M6000 - Manual (Page 86)

Samsung M6000 User’s Manual Working with PC Cards 75
successfully assigns system resources to your card, the computer beeps
twice.
If CardWizard cannot automatically configure your PC Card, the
computer beeps once and a message appears telling you that the card
has not been configured. Click the Wizard button on the CardWizard
window. CardWizard then analyzes why the card was not configured
and fixes the problem or gives you information to help fix the problem.
CardWizard works with the PowerProfiler program to manage PC
Cards when the computer enters or resumes from suspend mode.
CardWizard gives you instructions to prevent loss of data before the
computer enters suspend mode or may stop the computer from entering
suspend mode. ATA and modem cards can enter suspend mode.
Follow these guidelines when using PC Cards with CardWizard:


LAN (local-area network) cards can be inserted while the
computer is on but should be removed only when the system is
turned off.


SCSI cards should be inserted at startup to enable Windows
NT to find the device attached to the SCSI card. SCSI cards
can be removed when the computer is turned off. If you
suspendart your computer without the SCSI card installed, a
message may appear telling you that a service did not start.
You can ignore this message.


Modem and ATA cards can be inserted and removed while the
computer is on.
Before you remove a modem or ATA card from
your computer, stop the card through the
CardWizard program or you may lose data.
To stop and remove a PC Card from your computer:
1. In the SystemSoft CardWizard screen, click with the right
mouse button on the name of the card you want to remove.
2. Click Stop in the Actions menu. A red stop sign appears on the
main screen when the card is stopped.
3. Click OK.
4. Push the card eject button on the side of the PC Card slot.
5. Pull the card out of the slot compartment.