Samsung M6000 - Manual (Page 94)

Samsung M6000 User’s Manual About Drivers and System Resources 83
The version of SP3 on your computer’s hard drive includes the correct
video driver for your system. If possible, always install this version on
your computer.
To install SP3:
1. Run the executable file. On your computer’s hard drive this file
is located at D:\SP3\I386\update.
2. Follow the instructions on the screen with these exceptions:
a. When you are prompted to overwrite the uninstall
directory, click the Yes button.
b. When a prompt identifies your pcmcia.sys file as an
OEM-installed file and asks you to overwrite the
version of the file on your system with the service pack
version, click the No button.
If you overwrite the pcmcia.sys file on your
computer, you may be unable to use your
computer.
If you install SP3 from any source other than your computer’s hard
drive, the video driver that was installed on your computer at the
factory is overwritten. After you install the service pack, you must
reinstall the video driver the first time you restart your computer:
1. As the computer starts, select Windows NT Workstation Version
4.00 [VGA mode] as the operating system and press <Enter>.
2. Log on to the computer as supervisor. The Invalid Display
Settings window appears.
3. Click the OK button. The Display Properties window appears.
If the Change Display window appears, go to step
6.
4. Click the Display Type button. The Display Type window
appears.
5. Click the Change button. The Change Display window appears.