Samsung M6000 - Manual (Page 89)

Samsung M6000 User’s Manual Updating the System BIOS 78
5. Type the path to the extract utility. The utility is in the BIOS
update files you copied to the hard drive.
6. Click the OK button.
7. Follow the instructions on the screen to make your BIOS update
disk.
8. Leave the disk in the computer and suspendart the computer.
9. Follow the instructions on the screen to complete the BIOS
update.
10. After the BIOS update is completed, enter System Setup and set
the following fields:


Check the System Time and System Date fields to make
sure they display the current time and date.


Set the Plug & Play O/S . Windows NT 4.0 does not
support plug and play technology.


Set Infrared port (in the I/O Device Configuration
submenu). Setting the port to Disabled disables the
infrared link and frees an IRQ for another device.If you
purchase infrared software, you can use the infrared
link with Windows NT..


Set USB Device to Disabled. Setting the port to
Disabled frees an IRQ for another device. USB devices
are not supported by Windows NT 4.0.


Set the LPT Mode field (in the I/O Device
Configuration submenu) to Bi-directional.
restore other fields to the settings noted on your configuration
listing if you wish.