Sanyo VPC-S1070 - Manual (Page 29)

Camera Setup 15
Inserting an SD/MMC Memory Card
English
Inserting an SD/MMC Memory Card
The camera features 9.5 MB internal flash memory but you may also use an
optional SD/MMC memory card for additional storage.
Follow these instructions to insert the SD/MMC card.
1. Open the battery com-
partment at the bottom
of the camera.
2. Insert the SD/MMC card
into the memory card
slot as shown. (Label
side up)
3. Close the battery
compartment.
To remove the SD/MMC card, gently push the card until it pops out. Pull out the
card carefully.
Turning On
Press and hold the Power button to turn on the camera. To turn off the camera,
press the Power button again.
Note:
Please don't take in and out the SD card while camera is processing. It will make unexpected
error or image damaged.