Sanyo VPC-S1070 - Manual (Page 55)

Camera Settings 41
The Setup Menu
English
Auto LCD Off
The Auto LCD Off setting allows you to adjust the
length of time that the LCD screen will remain lit
before turning off to save battery power. 3 options
are available:
• OFF (default)
• 30 SEC
• 1 MIN
Auto Power Off
The Auto Power Off setting allows you to adjust
the length of time after which the camera will power
down when inactive. Use the Up/Down navigation
buttons to select from the menu options. 2 options
are available:
• 5 MIN (default)
• 2 MIN
Video Out
The Video Out setting allows you to adjust the
video output, depending on the type of your TV.
Use the Up/Down navigation buttons to select
from the menu options. 2 options are available:
• NTSC (default)
• PAL
USB Mode
The USB Mode setting allows you to select the
transfer method between your camera and your
PC. 2 options are available:
• PTP (PictBridge Print): When the camera is
connected to a printer by a USB cable which
supports Pictbridge, it can directly print images
stored on the media. For details on PTP
function, please See “PictBridge Print (PTP)” on
page 44.
• MSDC (default): The camera is set up to act as a mass storage device,
allowing only for transfer of files between your camera and PC.
AUTO LCD OFF
OFF
30 SEC
1 MIN
AUTO POWER OFF
5 MIN
2 MIN
VIDEO OUT
NTSC
PAL
USB MODE
PTP
MSDC