M-burst interval, White balance, Aeb m-burst interval white balance – Sanyo VPC-S1070 User Manual

Page 39: English

Advertising
background image

Capture Settings 25

The Capture Menu

English

AEB

When using the Auto Exposure Bracketing

(AEB) function, the camera automatically takes 3

consecutive photos with different exposures by

pressing the Shutter button once. For example,

when the current EV compensation value is +0.3

EV and the AEB bracket interval value is set to 0.3,

the camera takes shots of the same scene with

three varying levels of exposure: 0 EV, +0.3 EV,

and 0.7 EV. This function is only available in Auto

and P-Mode modes. To set the AEB mode:

1. Press the MENU button to display menu options.
2. Press the Left/Right navigation buttons to select AEB setting and press the

OK button.

3. Press the Up/Down navigation buttons to select from the available options:

AEB: Select to enable or disable the AEB function.
Bracket: Select to set the bracket interval value ranging from 0.3 to 0.0 EV in

0.3 or 0.4 EV increments.

Exit: Select to apply new settings to the camera and return to the setup

menu.

M-Burst Interval

The M-Burst Interval setting allows you to adjust

the burst interval when the multi-burst function is

enabled.Use the Up/Down navigation buttons to

select from the options.

• 1/30 Sec (default)
• 1/15 Sec
• 1/7.5 Sec

White Balance

The White Balance setting allows you to adjust

the camera setting according to the ambient white

light when shooting. White balance represents the

degree of coolness of the light. If the light has a

yellowish or reddish tinge, it is said to be warm; if it

has a bluish tinge, it is said to be cool. You can

select the setting and preview it on screen before

confirming your choice. Use the Up/Down

navigation buttons to select from the options. 5

white balance settings are available:

• Auto (default)
• Sunny
• Tungsten
• Fluorescent
• Cloudy

Note:
1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.
2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.

AEB

AEB

BRACKET
EXIT

ON

0.3EV

M-BURST INTERVAL

1/30 SEC

1/15 SEC
1/7.5 SEC

WHITE BLANCE

AUTO

SUNNY
TUNGSTEN
FLUORESCENT

Advertising