Sony DAV-IS10 - Manual (Page 40)

masterpage:Left
specdef v20060111
filename[G:\FM\Sony\0508\3212589121\3212589121DAVIS10\gb08usi.fm]
model name [DAV-IS10]
[3-212-589-12(1)]
40 US
Us
ing
the HDM
I CO
NTR
O
L
Func
tion
fo
r ‘
B
RA
VI
A
’ The
atre Sy
nc
‘BRAVIA’ Theatre Sync can be used only with Sony ‘BRAVIA’ TVs that carry this function.
By connecting Sony components that are compatible with the HDMI CONTROL function with an
HDMI cable (not supplied), operation is simplified as below:
• One-Touch Play (page 43): By pressing only H on the remote, the TV turns on and is set for DVD
input mode automatically, and the sound is output automatically from the speakers of this system.
• System Audio Control (page 44): While watching TV, you can select to output the sound from the
TV speaker or the speakers of this system.
• System Power Off (page 45): When you turn the TV off by using the power button on the TV's
remote, the system turns off simultaneously.
HDMI CONTROL is a mutual control function standard used by HDMI CEC (Consumer Electronics
Control) for HDMI (high-definition multimedia interface).
The HDMI CONTROL function will not operate in the following cases:
• When you connect this system to a component which is not correspond with Sony's HDMI
CONTROL function.
• When you connect the control unit and components using other than the HDMI connection.
We recommend that you connect this system to products featuring ‘BRAVIA’ Theatre Sync.
Note
• Depending on the connected component, the HDMI CONTROL function may not work. See the operating
instructions of the component.
Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync