SMC Networks Barricade SMCBR14UP - Manual (Page 10)

Routing Table Supported Allows you to determine which physical interface address to use
for outgoing IP data grams. If you have more than one router and
subnet, enable the routing table to allow packets to find the proper
routing path and the different subnets to communicate with each
other.
4 | Panel Layout
The following figure shows the front panel layout, which is followed by a table describing in detail the
status and function of each LED.
SMCBR14UP
LED Function Color Status Description
Power Power
indicator Green Steady Power is being applied to this
device
M1 System
status
indicator Orange Blinking
M1 is flashing once every
second to indicate that the
system has power
Steady The WAN port is connected WAN Wan port
activity Green
Blinking
The WAN port is sending or
receiving data
Steady An active station is connected to
the LAN port Link/Act. 1–4 Link status Green
Blinking
The corresponding LAN port is
sending of receiving data
Speed 10/100 Data rate Green Steady Data is transmitted at 100 Mbps
On The USB port is linked. USB USB port
activity
Green
Blinking
The USB port is sending or
receiving data.
SMCBR14UP Rear Panel: 4 LAN, 1 WAN, 1 USB, 1 PRINTER
10