SMC Networks Barricade SMCBR14UP - Manual (Page 48)

Step 7 – Changing the Printer Name.
When the correct driver has been selected or installed from disk, pressing Next will step through to the
Selecting a mem
ress Next will step through the rest of the wizard.
tep 8 - Finishing and printing a test page
ther pages should be left as the values that appear automatically however it is strongly recommended that
Printer Name screen.
orable name for the printer is recommended.
P
S
O
you print a Test Page.
Pressing Finish at the end of the wizard will finish the installation and a test page will be printed if that was
selected.
NOTE
– If the test page does not print, please restart your computer and try again.
48