Smeg XXSC111P - Manual (Page 28)

62
Instructions for the Installer
12.2 Removing the door
12.2.1 With type 1 mobile levers
With the door completely
open, lift the levers A of the
two hinges until they touch
the hinges B and take hold
of the two sides of the door
with both hands close to the
hinges.
1)
Raise the door to an angle of about 45° and remove it. If the hinges have
not locked, repeat the operation, raising the levers and keeping the door
slightly raised. To reassemble, fit the hinges B into their grooves, then
lower the door into place, ensuring that it remains fitted into the grooves C,
then lower the levers A.
12.2.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the holes
from the inside. Close the door to an angle of about 45° and lift it off. To
reassemble, fit the hinges into their grooves, then lower the door into place
and extract the pins.
12.3 Removing the gasket
To allow thorough cleaning of the
oven, the door gasket can be
removed.