3 first use, 1 setting the current time, 2 changing the current time – Smeg XXSC111P User Manual
Page 9: 4 selecting the function, 1 cooking with preset temperature, 2 changing the preset temperature, Int «7.3 first use, Instructions for the user
43
Instructions for the User
7.3
First use
At first use, or after a power failure, the oven's left hand-display, DSP1, will
show a flashing
symbol. To start any cooking operation, the current
time must be set.
7.3.1
Setting the current time
To set the current time, turn PT1 to the right and left to increase or
decrease the hours. Press it once to move on to setting the minutes. Turn
it the right and left to increase or decrease the minutes and press it to set
the current time. The
symbol will appear on the display, which will stop
flashing.
7.3.2
Changing the current time
It might become necessary to change the current time, for example at the
switch from summer to winter time. To do this, starting from the standby
setting (see point «7.2 Operating modes») keep PT1 pressed for a few
seconds until the figures on DSP1 flash. Now repeat the operations
described in point «7.3.1 Setting the current time».
7.4
Selecting the function
In the ON state only, a cooking function can be selected by simply turning
PT2 to the right or left. The function selected will change colour to red on
DSP3. The preset cooking temperature will be displayed on DSP2.
7.4.1
Cooking with preset temperature
After selection of the function required, the oven will start the cooking
procedure at the preset temperature and the symbol will light up.
Cooking itself is preceeded by a preheating stage, which allows the oven
to heat to the cooking temperature more quickly. The
symbol flashes
on DSP2 to indicate that this stage is in progress. When the preheating
stage is over, the
symbol will remain constantly on to indicate that the
food can be placed inside the oven.
7.4.2
Changing the preset temperature
The temperature preset for each function can be changed to suit the user's
requirements.
At any time while cooking is in progress, turn PT1 in either direction to
increase or decrease the cooking temperature by 5 degrees at a time. PT1
can also be held in the left or right position to increase or decrease the
setting more quickly.