Sharp MX-M1100 - Manual (Page 16)

14
SPECIFICATIONS
Finisher specifications
*1 A5 and 5-1/2" x 8-1/2" sizes must be fed from the inserter.
*2 Tray capacity assumes a paper weight of 80
g/m 2 (21 lbs. Bond). The maximum number of sheets that can be held varies
depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper.
*3 Up to 50 sheets can be stapled when the sheets are the same width but different lengths (A3 and A4, B4 and B5, 11" x 17" and
8-1/2" x 11"). In this case, up to 30 sets can be output to the offset tray.
*4 The maximum number of sheets for stapling assumes a paper weight of 80 g/m 2 (21 lbs. Bond) and includes two cover sheets that
are 205 g/m 2 (110 lbs. Index). When folded paper is included, one folded sheet is equivalent to 10 regular sheets.
Model MX-FNX5
Paper sizes* 1
A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2",
5-1/2" x 8-1/2"R, 8K, 16K, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm,
312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm
Paper weight
Top tray: 52 g/m 2 to 205 g/m 2 (16 lbs. Bond to 110 lbs. Index)
Offset tray: 52 g/m 2 to 300 g/m 2 (16 lbs. Bond to 170 lbs. Index)
Modes Non-staple, staple
Tray
capacity*
2
Top tray
500 sheets (A4, A4R, B5, B5R, A5, A5R, 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2",
5-1/2" x 8-1/2"R, 16K, 16KR, 318 mm x 234 mm, 312 mm x 220 mm, 320 mm x 225 mm)
250 sheets (A3W, A3, B4, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13",
7-1/4" x 10-1/2"R, 8K, 318 mm x 469 mm, 312 mm x 440 mm, 320 mm x 450 mm)
Folded paper 30 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R)
Offset tray* 3
Non-stapling:
3000 sheets (A4, B5, 8-1/2" x 11")
1500 sheets (A3, B4, A4W, A4R, B5R, 11" x 17",
9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
8K, 318 mm x 234 mm, 312 mm x 220 mm,
320 mm x 225 mm)
1000 sheets (A3W, 12" x 18",
318 mm x 469 mm, 312 mm x 440 mm,
320 mm x 450 mm)
500 sheets (A5, 5-1/2" x 8-1/2")
100 sheets (A5R, 5-1/2" x 8-1/2"R)
Folded paper 30 sheets (A3, B4, A4R, 11" x 17",
8-1/2" x 14", 8-1/2" x 11"R) Stapling:
200 sets or 3000 sheets (A4, A4R, B5, B5R,
8-1/2" x 11", 8-1/2" x 11"R, 16K, 16KR)
150 sets or 1500 sheets (A3, B4, 11" x 17",
8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13",
7-1/4" x 10-1/2"R, 8K)
Power supply Supplied from the machine
Dimensions
800 mm (W) x 730 mm (D) x 980 mm (H) (31-31/64" (W) x 28-47/64" (D) x 38-37/64" (H))
(When output tray is stored)
Weight Approx. 72.8 k g (160.5 lbs.)
Overall dimensions when
attached to machine 2101 mm (W) x 771 mm (D) (82-11/16" (W) x 30-11/32" (D))
Stapler section
Allowed paper sizes for
stapling
A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16K, 16KR
(Four stapling positions: one staple at bottom left corner, one staple at top left corner, one slanted
staple at top left corner, and two staples.)
Paper weight for stapling 60 g/m 2 to 105 g/m 2 (16 lbs. Bond to 28 lbs. Bond)
Maximum number of
sheets for stapling*
3, 4
100 sheets (A4, A4R, B5, B5R, 8-1/2" x 11", 8-1/2" x 11"R)
50 sheets (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 7-1/4" x 10-1/2"R, 8K, 16K,
16KR)
(50 sheets when the sheets are the same width but different lengths.)