Sharp MX-M1100 - Manual (Page 21)

19
SPECIFICATIONS
Printer specifications* 1
*1 To use the printer function of the machine, the printer expansion kit (MX-PBX2) is required.
*2 600 x 600 dpi when the PCL5e printer driver is used.
*3 When the PS3 expansion kit (MX-PKX4) is installed and the machine is used as a PostScript printer.
*4 Barcode font kit (AR-PF1) is required.
*5 Supported operating systems are Windows 2000 / XP / Vista.
Type Built-in
Continuous printing speed
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
Printing resolution 600 x 600 dpi / 1200 x 1200 dpi* 2
Printer driver type PCL5e, PCL6, PostScript 3 compatible* 3
Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk
Supported client PC
operating systems See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL5e, PCL6 80 European fonts, 28 barcode fonts* 4 , 1 bitmap font
PostScript 3 compatible* 3 136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX
USB connectivity: Supports USB 2.0 (Hi speed)*
5
Memory 1 GB (The printer expansion kit includes 512 MB of expansion memory.)
Print area
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.