Smooth Fitness 5.45 - Manual (Page 44)

43 5.45 MOTORIZED TREADMILL
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Symptom Resolution
Treadmill will not power up
Check the following:
▪ Make sure the power cord is plugged into a surge protector, the
surge protector is plugged into a properly grounded outlet and the
surge protector is turned on (refer to the Power Requirements
section in this manual).
▪ Equipment circuit breaker is in the reset position
▪ Equipment power switch is in the on position
▪ Safety key is properly inserted into the computer console
▪ Wall outlet is properly functioning with correct voltage (Have an
electrician check for inadequate voltage at the outlet refer to the
Power Requirements section in this manual)
▪ House circuit breaker is reset and is the proper size. (refer to
the Power Requirements section in this manual)
Treadmill stops operation during use
ƒ Safety key is properly inserted into the computer console
ƒ Equipment circuit breaker is in the reset position
ƒ House circuit breaker is reset, meets proper requirements and if
worn replaced by an electrician. (refer to the Power Requirements
section in this manual)
ƒ Program time has expired
Treadmill will not incline
(Power fold models only) ƒ Check for proper positioning of spring knob for folding(See
procedure in owner’s manual)
Treadmill will not unfold
Power Fold only
▪ Check for proper positioning of spring knob for folding(See
procedure in owner’s manual)
Manual Fold only
▪ Folding locking lever is depressed
Treadmill running belt moves slower than speed
displayed on computer ƒ Metric/English conversion (See owner’s manual for Metric/English
conversion process)
Treadmill running belt moves slower than speed
displayed on computer ƒ Metric/English conversion (See owner’s manual for Metric/English
conversion process)
Running belt is not centered
ƒ Treadmill is properly leveled(See procedure in owner’s manual)
ƒ Center running belt (See Centering procedure in owner’s manual)
Running belt is slipping or hesitating while in use ƒ Tension running belt (See process in owner’s manual)
Treadmill running belt moves slower than speed
displayed on computer ƒ Metric/English conversion (See owner’s manual for Metric/English
conversion process)
Running belt is not centered
▪ Treadmill is properly leveled(See procedure in owner’s manual)
ƒ Center running belt (See Centering procedure in owner’s manual)
Running belt is slipping or hesitating while in use ƒ Tension running belt (See process in owner’s manual)