Silicon Optix 50HD - Manual (Page 25)

Chapter 3 – Operation
16
O
PERATION
Navigation Buttons
Press the up and down arrow buttons to scroll vertically through the menus. Press
the Enter button to open submenus and enter. Use the Exit button to go to the pre-
vious menu.
The Remote Control
The remote control provides a convenient way to control the projector.
Installing Remote Control Batteries
Refer to the following illustrations and instructions on installing the remote control
batteries.
1. Press the battery cover latch and pull the battery cover open.
2. Insert two AAA batteries into the battery compartment, observing the polarity
marks in the battery compartment casing.
Using as a Wired Remote Control
To save battery power and use the remote control when line-of-sight access to the
remote control sensors is inconvenient, connect the included remote control cable
between the remote control and the projector using the Wire Remote jack on the rear
panel. Refer to “Wired Remote Control” on page 11.