Turn on the the projector, Turn on the pc, Open the gamma manager – Silicon Optix 50HD User Manual
Page 50: Click setting, com port, Select the input mode, Amma, Anager
Advertising
Appendix C – The Gamma Manager Utility
41
G
AMMA
M
ANAGER
Using the Gamma Manager
Follow these instructions to get started using the Gamma Manager.
1. Connect the projector and PC using the RS-232 cable. See “Connecting the
Projector to a PC” on page 36.
2. Turn on the the projector.
3. Turn on the PC.
4. Set the projector Gamma Correction OSD menu to "Gamma User Mode".
5. Open the Gamma Manager.
6. Click Setting, COM Port.
7. In the COM Port Setting dialog, select the COM port from the drop-down list
that your projector is connected to.
8. Select the input mode
Gamma User Mode
Advertising