Siemens OPTIPOINT 410 S V6.0 - Manual (Page 138)

xml_05.fm
A31003-J4260-M101-2-76A9, 03-2007
XML Configuration Management, Administrator Manual
5-1
Sample Configurations
System Configuration
5 Sample Configurations
5.1 System Configuration
To provide a better overview, the items in the following table are highlighted gray. The column
on the right contains a reference to the WEB interface where the parameters are manually en-
tered.
For example, op420adv_conf.xml
Element or description WBM
<?xml version = "1.0" encoding = "utf-8" ?>
- <Message>
<Action>WriteItems</Action>
<ItemList>
<!-- Caution!! Empty attribute entries will delete associated data.
-->
<!-- If you do not want to configure an attribute, -->
<!-- the element must be deleted in the XML file. -->
<!-- The system configuration version attribute should be the first element. -->
<!-- -->
<!-- The value should have the format "2005.01 12:00 GMT" and be -->
<!-- assigned to the attribute name with the keyword "system-config-version". -->
<!-- The expression should be entered between the <Item ...> start tag and the -->
<!-- </Item> end tag. -->
<!-- -->
<!-- For example, <Item name = "system-config-version">2005.01 12:00 GMT</Item> -->
<!--Make sure you enter spaces before and after the "=" sign -->
<Item name = "system-config-version">2005.07.19 05:39 GMT</Item>
<!-- Use the "Item" start tag and the "name" attribute
-->
<!-- to enter system-specific information. -->
<!-- The following is a list of default elements. -->
<!-- Normally, attributes are entered between the <Item ...> start tag and -->
<!-- the </Item> end tag. -->
<!-- Administrator password (six characters) -->
<Item name = "admin-pwd">424242</Item> ! page 4-5
<!-- System description up to 24 characters long (for four-line display) -->