Siemens OPTIPOINT 410 S V6.0 User Manual
Page 140

xml_05.fm
A31003-J4260-M101-2-76A9, 03-2007
XML Configuration Management, Administrator Manual
5-3
Sample Configurations
System Configuration
<Item name="country">0</Item>
<!-- Language (0 = English, 1 = German, 2 = French, 3 = Spanish, 4 = Italian)
-->
<Item name="language">0</Item>
<!-- SNTP server IP address or domain name
-->
<Item name="sntp-addr">172.16.127.2</Item>
<!-- SNTP time zone offset in minutes
-->
<Item name="sntp-tz-offset">60</Item>
<!-- Daylight saving (true|false)
-->
<Item name="daylight-save">true</Item>
<!-- Ringer setting (alert type^melody^tone^duration)
-->
<Item name="alert" index="1">http://127.0.0.1/Bellcore-dr2^7^3^60</Item>
<Item name="alert" index="2">http://127.0.0.1/Bellcore-dr3^8^2^60</Item>
<Item name="alert" index="3">http://127.0.0.1/Bellcore-dr4^4^2^60</Item>
<Item name="alert" index="4">http://127.0.0.1/Bellcore-dr5^1^1^60</Item>
<!-- Dial plan settings
-->
<!-- Dial plan ID (!Identifier)
-->
<Item name="dial-plan-id">!Interop</Item>
<!-- Dial plan entries (digits^C|S^min^max^timer^limitation^B|E^comment^)
-->
<Item name="dial-plan-entry" index="1">3^S^^4^^#^B^4 digit bypass extension^</Item>
<Item name="dial-plan-entry" index="2">561^S^^10^^#^^10 digit number^</Item>
<Item name="dial-plan-entry" index="3">911^S^3^3^^^E^emergency number^</Item>
<Item name="dial-plan-entry" index="4">0^S^^15^^#^^national calls^</Item>
<Item name="dial-plan-entry" index="5">1^S^^15^^#^^trunk 1^</Item>
<Item name="dial-plan-entry" index="6">2^S^^15^^#^^trunk 2^</Item>
<Item name="dial-plan-entry" index="7">4^S^^15^^#^^trunk 4^</Item>
<Item name="dial-plan-entry" index="8">6^S^^15^^#^^trunk 6^</Item>
<Item name="dial-plan-entry" index="9">7^S^^15^^#^^trunk 7^</Item>
<Item name="dial-plan-entry" index="10">81^S^^15^^#^^international calls^</Item>
<!-- Dial plan enabled (true|false)
-->
<Item name = "dial-plan-enabled">true</Item>
<!-- Audio mode (0=high quality preferred, 1=low bandwidth preferred
-->
<!-- 2=low bandwith only, 3=G.711 preferred )
-->
<Item name = "audio-mode">0</Item>
Element or description
WBM