Sony DSR-DR1000A - Manual (Page 71)

71
Menu Contents
Ch
ap
te
r 6
Men
u
Set
tin
g
VIDEO IN
AUDIO IN
TIME CODE IN
TIME CODE OUT
VIDEO IN
AUDIO IN
TIME CODE IN
TIME CODE OUT
VIDEO IN
AUDIO IN
TIME CODE IN
TIME CODE OUT
Composite video or S-video signal
Audio signal
Time code signal
Camcorder 1
Camcorder 2
Camcorder n
DSR-DR1000A/DR1000AP
(1st unit)
DSR-DR1000A/DR1000AP
(2nd unit)
DSR-DR1000A/DR1000AP
(nth unit)
THROUGH mode
In this mode, the LTC signal is output with the phase
synchronized with the input time code signal. This mode is
appropriate when recording signals from multiple devices on a
number of recorders.
When the camcorder is in genlock mode, the time code
precision is ±0 frames. When the camcorder is not in genlock
mode, it is ±1 frame.
VIDEO IN VIDEO OUT
VIDEO LOOP THRU
TIME CODE IN
TIME CODE OUT
VIDEO IN
VIDEO LOOP THRU
TIME CODE IN
TIME CODE OUT
VIDEO IN
VIDEO LOOP THRU
TIME CODE IN
TIME CODE OUT
Composite video or SDI (video and audio) signal
Time code signal
Output device
(VCR, camera, etc.)
DSR-DR1000A/DR1000AP
(1st unit)
DSR-DR1000A/DR1000AP
(2nd unit)
DSR-DR1000A/DR1000AP
(nth unit)
VIDEO INPUT PHASE mode
The time code output signal is synchronized with the input video
signal.
This mode is appropriate when the output from a single device is
recorded on a number of recorderss. The connections are loop-
through connections.
In this mode, the same time code is recorded on all of the
recorders 1 to n.