Sony DSR-DR1000A - Manual (Page 92)

92
Regular Checks
C
h
a
p
ter
8
Ma
in
te
na
nc
e
an
d
T
rou
b
le
s
h
o
o
ti
ng
The four-digit value to the left of the slash (/) is the
resettable trip count, and the right value is the cumulative
total from manufacture.
Digital hours meter indications in the time
counter display
One of the three indications appears in the time counter
display at a time. Use the
J (CUE) and j buttons in the
menu control section to change the item displayed.
Initially, only the trip value appears. In T2 mode and T3
mode, hold down the
k (OUT) button to display also the
cumulative total from manufacture, which will appear to
the right of the trip value and the slash (/).
The following illustrates the digital hours meter
indications in the time counter display in all three display
modes. The right-hand indication for each display mode is
the indication you can view while holding down the
k
button in the menu control section.
T1 (OPERATION) mode:
T2 (PLAYING) mode:
T3 (RECORDING) mode:
To end the digital hours meter display
Press the MENU button.
To reset the trip values
About this operation, consult your Sony dealer.
HOURS METER
T1 00000 X10 HOURS
T2 0000/00000 X10 HOURS
T3 0000/00000 X10 HOURS
T4 0000/00000 X10 HOURS
T1:OPERATION
T2:PLAYING
T3:RECORDING
T4:- - -
Resettable trip counts
Unresettable counts
a) T4 is not currently supported.
a)
a)
Oper. 00000
Play 0000 0000/00000
Rec 0000 0000/00000