Cueing up a desired cue point, Rmation on this operat – Sony DSR-DR1000A User Manual

Page 41

Advertising
background image

41

Playback

C

hap

te

r 3

Re

co
rd

in

g an

d Pl

a

yba

c

k

Note

When controlling this unit from external equipment, set
the REMOTE I/F menu item (see page 69) and the Control
mode selector so that the remote mode indicators in the
display section are on or off as follows.

• When using an editing control unit connected to the

REMOTE IN (R) connector:

• When using an RM-LG2 connected to the

CONTROL connector:

• When using equipment connected to the

S400(i.LINK) connector:

For description on how to carry out search operations via
external equipment, see the operating instructions for the
equipment.

Cueing Up a Desired Cue Point

When you have started this unit, the cue pointer is
automatically positioned at the top of the disk (or the start
point of the first-recorded clip).
When you press the NEXT button with the

J (CUE)

button held down, the cue pointer jumps to the first-
registered cue point. A second press of the NEXT button

with the

J (CUE) button held down makes the cue pointer

jump to the second-registered cue point, a third press
makes the cue pointer to the third-registered cue point, and
so on.
When you press the PREV button with the

J (CUE) button

held down, the cue pointer jumps to the previous cue point.

If cue points are registered as shown in the above figure,
pressing the NEXT button repeatedly with the

J (CUE)

button held down makes the cue pointer jump in the order
ARBRCRD.
To jump back from point D to point B for example, press
the PREV button twice with the

J (CUE) button held

down.

Switch/menu item

Setting

Control mode selector

REMOTE
(REMOTE indicator lights.)

REMOTE I/F menu item

9PIN
(9P indicator lights.)

Switch/menu item

Setting

Control mode selector

LOCAL

REMOTE I/F menu item

—

Switch/menu item

Setting

Control mode selector

REMOTE
(REMOTE indicator lights.)

REMOTE I/F menu item

i.LINK
(i.LINK indicator lights.)

A

D

B

C

Top of disk: The initial position of the cue pointer
when you have started the unit.

Clip 1

Clip 2

Clip 3

A: First-registered cue point
B: Second-registered cue point
C: Third-registered cue point
D: Fourth-registered cue point

Advertising
This manual is related to the following products: