Sharp DV-HR300U - Manual (Page 113)

113
On-screen Error Messages
CANNOT HIGH SPEED DUB THIS
TITLE.
TITLE PROTECTION IS SET.
CANCEL TITLE PROTECTION
BEFORE DUBBING.
CANNOT DUB TO DISC DUE TO
COPY PROTECTED PROGRAM.
TIMER PROGRAM EXCEEDS THE
MAX.
CANNOT DUB TO THE DISC.
CANNOT DUB FROM THE DISC.
COPY PROTECTED PROGRAM WILL
BE MOVED.
• Occurs if you attempt high-speed
dubbing onto DVD in Video mode of
a title for which “High Speed
Dubbing Priority” has not been set,
or if you attempt high speed
dubbing of a title edited in frame
units on the HDD.
• Occurs when you attempt to dub a
title containing a “Copy Once” part
for which title protection has been
set.
• Occurs if you attempt to dub a title
containing a “Copy Once” part to
DVD-R or a non-CPRM compatible
DVD-RW.
• Occurs when you attempt to set
timer recording for more than the
maximum number (32) of timer
programs.
• Occurs if an unrecordable disc is
loaded (i.e. when the maximum
number of titles or chapters is
exceeded, when the disc is
protected, when the disc is
scratched or dirty, or when the disc
is a ROM disc).
• Occurs when a disc other than a
DVD-R/RW is loaded.
• Occurs if you attempt to dub a title
containing a “Copy Once” part.
• Perform “Rate Conversion Dub-
bing”.
• If a title contains a “Copy Once”
part, you can only move the
original. If title protection is set for a
title, you cannot move it, so perform
dubbing (movement) after cancel-
ing title protection.
• Dub in VR mode to a CPRM-
compatible DVD-RW.
• Set the dubbing timer after
canceling the timer recording for
one program.
• Replace with a recordable disc.
• Dub from a DVD-R/RW disc.
• Be careful because the dubbing
source video is erased after
dubbing.
Error message Possible Error Suggested Solution
Messages during Dubbing
Messages during Editing
CANNOT SELECT MORE.
CANNOT SET THIS POSITION.
CHAPTER IS FULL. CANNOT
OPERATE THIS FUNCTION.
CANNOT COMBINE THESE CHAP-
TERS.
• Occurs if you attempt to select
more than 20 titles (chapters) when
you perform Erase Selected Title.
• Occurs if you attempt to designate
a range shorter than 3 seconds and
edit.
• Occurs if the editing result exceeds
the upper limit of total number of
chapters (999).
• Occurs if you attempt to combine
chapters which cannot be com-
bined. (Chapters created when you
erase a scene or chapter in a single
title cannot be erased).
• Erase a maximum of 20 titles
(chapters) at a time.
• Designate a range of 3 seconds or
more. (If you designate a range of 3
seconds or more, you can
designate in frame units.)
• Edit after erasing unnecessary
chapter marks by combining
chapters.
Error message Possible Error Suggested Solution
Other Message
TURN OFF PROGRESSIVE SCAN
PLAYBACK. • Occurs if the Recorder is con-
nected with the Video In or S-Video
In jack of a TV, and PROGRESSIVE
OUT is set to “PROGRESSIVE
SCAN ON”.
• Set PROGRESSIVE OUT to
“PROGRESSIVE SCAN OFF”.(Page
102)
• Correctly set “CONNECTING
TERMINAL” at “VIDEO/AUDIO
SETTING” in “ADJUSTMENT”.(Page
102)
Error message Possible Error Suggested Solution