Sharp DV-HR300U - Manual (Page 30)

30
8
Press SET/ENTER to select “TIME
ZONE”.
9
Press \ / | to select the desired
time zone.
• If you want the Recorder to use the
time zone from which broadcasts with
EDS signals are received, choose
“AUTO”. If broadcasts with EDS
signals are received from a different
time zone than the one in which you
live, be sure to select your time zone.
ADJUST CLOCK USING EDS BROADCAST
SIGNAL.
SELECT THE EDS CH SETTING METHOD
EDS CH SET
SET THE TIME ZONE
TIME ZONE
OTHER SETTINGS[CLOCK SETTING]
AUTO SETTING
MANUAL SETTING
AUTO
ATLANTIC
13 MANUAL
8 2 : 0 AM SAT 1 5 2 / 2 1
10
Press SET/ENTER, then EXIT.
11
Press POWER to turn off the
Recorder.
• The Auto Clock Setting function will
automatically set the clock.
NOTE
• If the EDS CH SET mode is set to
“MANUAL” in step 6 and a channel that
does not carry EDS signals is selected in
step 7, the Auto Clock Setting function will
not operate.
• In step 7, the number of selectable
channels depends on the mode setting on
the “CHANNEL PRESET” screen. See the
table below.
• As you press \ \ \ \ \ / | | | | | in step 9, the TIME
ZONE choices change as follows.
ATLANTIC AUTO EASTERN CENTRAL
ALASKA PACIFIC MOUNTAIN HAWAII
• If you press RETURN, START MENU or
EXIT before pressing SET/ENTER in step
10, the data will not be stored.
Auto Clock Setting
(If you know a channel that carries EDS
signals)
Important!
When using a cable box:
• See “CATV or Satellite Receiver Connec-
tions” on pages 24 and 25.
• Leave power on the cable box turned on
and select a channel that carries EDS
signals.
1
Press START MENU to display
the START MENU screen.
REC LIST
TIMER
PROGRAM/
CHECK
INITIALIZE/
FINALIZE
OTHER
SETTINGS
EDIT/
ERASE
DUBBING
DISPLAYS LIST OF RECORDED TITLES FOR PLAYBACK
START MENU[REC LIST] 8 2 : 0 AM SAT 1 5 2 / 2 1
2
Press
' / " / \ / | to select
“OTHER SETTINGS”, then press
SET/ENTER.
3
Press \ / | to select “ADJUST-
MENT”.
4
Press ' / " to select “CLOCK
SETTING”, then press SET/
ENTER.
5
Press ' / " to select “AUTO
SETTING”, then press SET/
ENTER.
ADJUST CLOCK USING EDS BROADCAST
SIGNAL.
SELECT THE EDS CH SETTING METHOD
EDS CH SET
OTHER SETTINGS[CLOCK SETTING]
AUTO SETTING
MANUAL SETTING
AUTO
8 2 : 0 AM SAT 1 5 2 / 2 1
6
Press ' / " to set EDS CH SET
mode to “MANUAL”.
• If you do not know which channel
carries EDS signals, then select
“AUTO”.
7
Press \ / | to select a channel
that carries EDS signals.
• The number of channels that can be
selected depends on the mode
setting on the “CHANNEL PRESET”
screen. See NOTE.
When using a cable box:
• Input the output channel (02, 03, or
04) of the cable box.
Clock Setting
AIR/CATV Selectable channels
AIR
CATV
02 03 04 68 69 02
01 02 03 124 125 01
REC. FUNCTION VIEW/PLAY SETTING ADJUSTMENT
CLOCK SETTING
VIDEO/AUDIO SETTING
CHANNEL PRESET
OPTION SETTING
OTHER SETTINGS[ADJUSTMENT] 8 2 : 0 AM SAT 1 5 2 / 2 1