Advanced features, Alarm and sleep operation, N alarm – Sharp DK-A10 User Manual

Page 25: Table, Table body, Table row, For ipod playback: insert ipod to the unit, For tuner: set preset memory, For cd playback: insert disc to the unit, Graphic

background image




Advanced Features

Alarm and sleep operation


The unit turns on and play desired source (iPod, CD, TUNER, AUX)
or Buzzer sound for 30 minutes.

Before setting the alarm:

Setting the alarm content

Changing alarm source only

Activating and deactivating the alarm

Checking the alarm setting

Press the ALARM button.
The selected source or buzzer type will blink.
The unit will display the alarm time for 3 seconds.
During stand-by mode, the display will remain for 6 seconds.

Example: The time is 10:00 AM and iPod function is selected.


Buzzer sound will be output from right speaker only.
Alarm will not activate during power on mode.
When iPod is selected in step 2, if iPod unit is not detected during
alarm activation, source will automatically change to BUZZER 1.
When performing alarm using another unit connected to AUX,
select AUX in step 2. The unit will turn on and enter the stand-by
mode automatically, however, the connected unit to AUX will not
turn on or off.

Snooze function

Once timer playback has started, pressing the SNOOZE/DIMMER
button will stop playback for 5 minutes.
Once the snooze time has expired, playback will continue.

To turn off the alarm function

During alarm or snooze, press the ALARM ON/OFF button to turn off.

1 Check that the clock is set to the correct time (refer page 13).

If it is not set, you cannot use the alarm function.

2 For iPOD playback: Insert iPod to the unit.
3 For TUNER: Set preset memory.
4 For CD playback: Insert disc to the unit.


Press and hold the ALARM button for more than 2 seconds.


Press the


button to select source or buzzer.

If TUNER is selected, press the


button to select a

preset station.

Press the ALARM button.


Press the


button to adjust the hour.

Press the ALARM button.


Press the


button to adjust the minute.

Press the ALARM button.


If other than BUZZER is selected in step 2, press the


button to select volume.
Press the ALARM button.

After source is selected in step 2, press and hold the ALARM
If TUNER is selected, press and hold the ALARM button after
preset station is selected in step 3.
The time and volume will be automatically set to the previous


Press the ALARM ON/OFF button on main unit to activate and
deactivate the alarm function. When activated:

During power on, “ALARM” will appear.
During stand-by mode, ALARM indicator will light up.


Set to CLOCK function or stand-by mode.

This manual is related to the following products: