Samsung ML 7300N - Manual (Page 49)

U
SING
O
PERATOR
P
ANEL
3.14
JOB MENU
DUP.TOP 5.0 (Factory Default)
0~9.9mm (In increments of 0.1)
This item lets you select the top margin of the print
materials when the Duplex menu item is set to Long.
DUP.LEFT 5.0 (Factory Default)
0~9.9mm (In increments of 0.1)
This item lets you select the left margin of the print
materials when the Duplex menu item is set to Long.
S-BIND 0 (Factory Default)
0~22mm (In increments of 1)
This item lets you select the left margin for the binding
when short edge duplexing.
L-BIND 0 (Factory Default)
0~22mm (In increments of 1)
This item lets you select the left margin for the binding
when long edge duplexing.
FUSER CLEAN Select ‘FUSER CLEAN’ if you notice random dirty spots on
the back side of the paper.
It cleans fuser contamination.
Item Values and Functions