Samsung ML 7300N - Manual (Page 54)

U
SING
O
PERATOR
P
ANEL
3.19
RESET NIC
CFG NET
The PortThru card is reset.
TCP/IP ON
OFF
This menu item lets you enable TCP/IP.
CFG TCP YES
NO
This menu item lets you configure TCP/IP.
LPD ON
OFF
This menu item lets you print using LPD.
APL TALK
NETWARE
ON
OFF
You can configure the printer server for IPX/SPX
configuration parameters, and FRAME. When you set it to
ON, you may select the Frame Type.
DHCP
CFG ADRS
BOOTP
RARP YES
NO
You can configure the print server for TCP/IP
configuration parameters, DHCP, CFG ADRS, BOOTP, and
RARP. When you enable TCP/IP protocol, you have to select
one of the IP Address assignment methods, DHCP, CFG
ADRS, BOOTP, RARP. In case of DHCP, RARP, BOOTP, you
need to configure the server. In case of CFG ADRS, you
have to enter the IP address, Subnet mask, Default
Gateway manually.
YES
NO
This menu item lets you configure network settings.
NETWORK MENU
Item Values and Functions
ON
OFF
When you set APL TALK to OFF, this PortThru can not be
detected by Macintosh systems.