Network menu – Samsung ML 7300N User Manual
Page 62
14
Set the IP address of the WINDOWS pc running SyncThru
in step1. For example, if the IP address is 155.213.211.12,
follow these steps:
a
Press Item until SV-IP B1 appears on the display.
b
Press Value until 155 appears on the display.
c
Press Enter/Cancel.
d
Press Item until SV-IP B2 appears on the display.
e
Press Value until 213 appears on the display.
f
Press Enter/Cancel.
g
Press Item until SV-IP B3 appears on the display.
h
Press Value until 211 appears on the display.
i
Press Enter/Cancel.
j
Press Item until SV-IP B4 appears on the display.
k
Press Value until 12 appears on the display.
l
Press Enter/Cancel.
15
Reset printer and the firmware will be upgraded.
NETWORK MENU
Notes
:
After the ”Completed. Network Card will start about 30secs
later” message is displayed on SyncThru, click OK.
It may take a few seconds to write the new file to Firmware.
Normally 30 seconds is sufficient.
U
SING
O
PERATOR
P
ANEL
3.27