Siemens HiPath 4000 User Manual
Page 60
Alphabetical Reference
Description of functions
60
Clear Screenlock Password
•
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
•
Herewith the user password will be reset.
Clear User Data
•
Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
•
With this function you can delete all the entries made by the user in the
optiPoint 410/420.
Codec
•
Here you can select the audio transfer principle that should be used.
•
Standard value
Codec Independent Threshold Values
•
Max jitter threshold (in ms): The jitter will be compared with this thresh-
old. The jitter will be measured between two consecutive RTP packag-
es.
– Valid values: 1 ... 255.
– Standard value
•
Avg round trip delay threshold (in ms): Round Trip Delay is the summary
of the delays in both directions.
– Valid values: 1 ... 65535.
– Standard value
Codec
Audio Mode
Use of
High
quality
preferred
Uncompressed audio
transmission
Uncompressed audio transmis-
sion use (
Æ G.711). Suitable for
broadband Internet connec-
tions.
Low
bandwidth
preferred
Use preferred com-
pressed audio transmis-
sion.
Suitable for connections with
different bandwidths.
Low
bandwidth
only
Use compressed audio
transmission exclusively.
Suitable for connections with
low bandwidth.