Siemens HiPath 4000 - Manual (Page 80)

Alphabetical Reference Description of functions
80
Terminal IP Address
• Enter the Æ IP address for the optiPoint 410/420 here, provided no
Æ DHCP server assigns this value dynamically (Æ DHCP).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Standard value Æ page 96.
• IP editor in optiPoint 410/420 Æ page 93.
Æ page 21 Æ page 17 Æ page 52
Terminal Mask
• Enter the Æ Subnet Mask for the optiPoint 410/420 here, provided that
no Æ DHCP server assigns this value dynamically (Æ DHCP).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Standard value Æ page 96.
• IP editor in optiPoint 410/420 Æ page 93.
Æ page 21 Æ page 17 Æ page 52
Time Source
• In this field, you specify how time is updated on your telephone.
Æ page 57
Time Window
• Messages sent by the gateway will be accepted only within this de-
fined time window.
Æ page 55
Timezone offset
• This entry is only required if you selected "SNTP" in the Æ Time Source
field.
• Enter the time difference (in seconds) between your time zone and
Greenwich Mean Time (GMT). Example for Germany: + 3600.
Æ page 57
USB Keyboard
• Configurable only on optiPoint 410/420 advance.
• Select the USB keyboard language from the list.
• Available languages: English, German, French, Spanish, American
Æ page 48
System All settings are transferred from the system ( Æ DHCP).
SNTP Enter the following parameters manually:
Æ Default SNTP IP, Æ Timezone offset, Æ Daylight saving