Sony CD-R Drive Unit CDU948S - Manual (Page 16)

16
Host Adapter Installation
Connect the free end of the flat cable to the existing SCSI host
adapter card and install the host adapter in the computer by inserting
it securely in a system expansion slot. Refer to the operating
instructions of the host adapter for complete instructions on its
installation and the assignment of its switches.
N o t e s :
• The red edge of the flat cable must be closest to pin number 1 of
the interface card connector.
• The following illustration is a sample system configuration of the
Sony CDU948S CD-R drive installation with a SCSI card.
Installing the Drive Unit into the Computer