Sony CD-R Drive Unit CDU948S - Manual (Page 17)

17
Installing the Drive Unit into the Computer
Termination
• If the CD-R drive is connected at the end of the SCSI chain, keep
the drive terminator mounted at the drive.
• If the CD-R drive isn’t the last device at the SCSI bus, remove the
termination from the CD-R drive and make sure that the last
device at the SCSI bus has a proper termination installed.
• Be aware that the SCSI bus needs to be terminated at each end of
the SCSI bus cable.
Closing the Computer
1
Replace the cover on the computer, being careful to reinstall all
screws that were removed.
2
Replace the AC power cord and turn on your computer.