SMC Networks 802.11g - Manual (Page 34)

30
User Guide
Standards Compliance
The SMCWAA-G EZ-Stream™ 802.11g Wireless Audio Adapter is designed to comply with the following standards.
FCC - Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that
the interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer
or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
SMC Networks, Inc. declare under our sole responsibility that the product “SMCWAA-G EZ-Stream™ 802.11g Wireless Audio
Adapter” complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Caution Statement
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 5 centimeters between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
Note: In order to maintain compliance with the limits of a Class B digital device, SMC requires that you use a quality interface
cable when connecting to this device. Changes or modifications not expressly approved by SMC could void the user’s
authority to operate this equipment.
Attach unshielded twisted-pair cable (UTP) to the RJ-45 port.
Description Country Compliance
Electromagnetic
Compatibility
USA FCC CFR47 Part 15B, Class II
Europe 89/336/EEC, ETS 301 489-1&17(2.4GHz)
EN61000-3-2(Harmonic AC current emissions)
EN55022 Class II, EN50082-1 (Immunity)
Japan VCCI Class II
Product Safety International CB (IEC60950)
Radio Regulations
USA FCC CFR47 Part 15C, para15.247, 205, 209
Europe EN 300 328
Japan ARIB STD-T66(Chan1-13), T-33(Chan14)
Canada IC RSS 210