SMC Networks SMC7004VBR V.2 - Manual (Page 25)

Advanced Setup
23
•
[PPPoE]
Enter the PPPoE user name and password assigned by
your Service Provider. The Service Name is normally optional,
but may be required by some service providers. Leave the
Maximum Transmission Unit (MTU) on the default value (1492)
unless you have a particular reason to change it. Enter a
maximum idle time (in minutes) to define a maximum period
of time for which the Internet connection is maintained during
inactivity. If the connection is inactive for longer than the
maximum idle time, it will be dropped. Enable the [Auto-
reconnect] option to automatically re-establish the connection
as soon as you attempt to access the Internet again.
•
[PPTP]
Point-to-Point Tunneling Protocol is a common connection
method used for xDSL connections in Europe.
•
[BigPond
®
]
The BigPond
®
Internet service is used in Australia.
Step Three: Finish Configuration
Once you have configured your type of ISP connection, simply
click the [Finish] button and the Barricade™ will automatically
configure your Internet connection.
Advanced Setup
Below is an outline of the [Advanced Setup] section. This
section is used to manually configure your ISP connection and
also define the advanced system parameters, manage and control
the Barricade™ and its ports, or monitor network conditions.