SMC Networks SMC7004VBR V.2 - Manual (Page 48)

47
T
ROUBLESHOOTING
The information outlined in this section describes some useful
steps for getting your computer and Barricade™ router online.
Verify you are connected to the
Barricade™ Router
If you are unable to access the Barricade™'s web-based
administration pages, then you may not be properly connected
or configured. The screen shots in this section were taken
on a Windows 2000 machine, but the same steps will apply
to Windows 95/98/Me/XP.
To determine your TCP/IP configuration status, please follow
the steps below:
1. Click [Start] then choose [Run].
2. Type cmd or command to open a DOS prompt.
3. In the DOS window, type ipconfig and verify the information
that is displayed.
4. If your computer is setup for DHCP, then your TCP/IP
configuration should be similar to the information displayed:
•
[IP Address]: 192.168.2.X
(x is number between 100 and 199)
•
[Subnet]: 255.255.255.0
•
[Gateway]: 192.168.2.1