Siemens Gigaset M49AM - Manual (Page 12)

Gigaset M49AM user manual
12
two rings, the answering machine is activated, it means that there
are messages. Otherwise, there are no messages. You may then
hang up to avoid any unnecessary charges.
Setting Auto Talk (Handset)
Press the Hold/Set up key on the handset to open the Menu.
Press +/- key to “Auto Talk”, then press the Hold/Set up key.
Press +/- key to select ON or OFF.
Press the Hold/Set up key to confirm.
Note: If you select ON, when a call comes in, you can simply
pick up the handset from the base to talk without pressing any
key.
Setting Network
(
Base
)
Residential users usually choose Public Net (default). But if the
phone is used as internal extensions (for office use), it is
necessary to set as “Private Net”. If you have questions on setting,
please consult your local telecom bureaus (corporate users can
consult the internal network management department).
Press the Hold/Set up key on the handset to open the Menu.
Press +/- key to “Network”, and then press the Hold/Set up key.
Press +/- key to select Public Net (SPC exchange) or Private Net
(Internal exchange).
Press the Hold/Set up key to confirm.
Restoring the Factory Settings
Press the Set up key on the base or the Hold/Set up key on the
handset to open the Menu.
Press Ʒ or ͩkey on the base or +/- key on the handset to
“Default”, and then press the Set up key or the Hold/Set up key.
Press Ʒ or ͩkey or +/- key to select “Yes” or “No”.
Press the Set up key or the Hold/Set up key to confirm.
Note: If you select “Yes”, all the settings on the phone will be
restored to factory settings.