Siemens Gigaset M49AM - Manual (Page 26)

Gigaset M49AM user manual
26
stored number?
z Be sure the settings of the Tone or Pulse
are correct.
Phone down or no connection between handset
and base z Unplug the power of the base and the
handset charger for 30 seconds, then plug
on the power and recharge the batteries for
16 hours. Re-register the handset.
Caller ID Service
Question Solution
No display z Replace the batteries and be sure the
batteries are inserted correctly.
z Have you applied the Caller ID Service
from your phone service company?
Display error z If the base receives any ineffective
information, it will display error.
No incoming call information z You must apply for the Caller ID Service
from your local phone service company.
Hotline
Hotline email
Hotline service tel
˖
˖
Website: www.siemens.com.cn/shc
4006 706 007
[email protected]