Sony ZX6 User Manual

Page 42

Advertising
background image

42

GB

FST-ZX6
Mexican models:

The following measured at AC 127 V, 60 Hz
DIN power output (rated): 220 + 220 watts (4 ohms at

1 kHz, DIN)

Continuous RMS power output (reference):

280 + 280 watts (4 ohms at
1 kHz, 10% THD)

Other models:

The following measured at AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated): 220 + 220 watts (4 ohms at

1 kHz, DIN)

Continuous RMS power output (reference):

280 + 280 watts (4 ohms at
1 kHz, 10% THD)

Inputs
PHONO IN (phono jacks):

sensitivity 3 mV,
impedance 47 kOhms

MIC (phone jack):

sensitivity 1 mV,
impedance 10 kOhms

GAME INPUT AUDIO L/R (phono jacks):

sensitivity 250 mV,
impedance 47 kOhms

GAME INPUT VIDEO (phono jack):

1 Vp-p, 75 ohms

VIDEO/MD IN L/R (phono jacks):

sensitivity 250 mV/
450 mV, impedance
47 kOhms

Outputs
PHONES (stereo phone jack):

accepts headphones of
8 ohms or more

VIDEO/MD OUT L/R (phono jacks):

voltage 250 mV,
impedance 1 kOhm

VIDEO OUT (phono jack):

max. output level 1 Vp-p,
load impedance 75 ohms

FRONT SPEAKER:
FST-ZX8/LBT-ZX8:
FRONT L/R

Use only the supplied
speaker SS-ZX8

SURROUND L/R

Use only the supplied
speaker SS-ZX8

FST-ZX6/LBT-ZX6:
FRONT L/R

Use only the supplied
speaker SS-ZX6

CD/MP3 player section

System

Compact disc and digital
audio system

Laser

Semiconductor laser
(

λ

=780 nm)

Emission duration:
continuous

Laser Output

Max. 44.6 µW*
*This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pick-up Block with 7 mm
aperture.

Frequency response

2 Hz – 20 kHz (±0.5 dB)

Wave length

780 – 790 nm

Signal-to-noise ratio

More than 90 dB

Dynamic range

More than 90 dB

OPTICAL CD DIGITAL OUT
(Square optical connector jack, rear panel)
Wave length

660 nm

Output level

–18 dBm

Tape deck section

Recording system

4-track 2-channel, stereo

Frequency response

50 – 13,000 Hz (±3 dB),
using Sony TYPE I tapes

Wow and flutter

±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section

Tuning range

87.5 – 108.0 MHz

Antenna

FM lead antenna

Antenna terminals

75 ohms unbalanced

Intermediate frequency

10.7 MHz

AM tuner section

Tuning range

530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)

Antenna

AM loop antenna

Antenna terminals

External antenna terminal

Intermediate frequency

450 kHz

Advertising
This manual is related to the following products: