Sony ZX6 - Manual (Page 15)

CD/MP3
15 GB
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a tape (page 19).
1
Press FUNCTION repeatedly until “CD”
appears in the display (or press CD on
the remote).
2
Press PLAY MODE in stop mode
repeatedly until “PGM” lights up in the
display.
3
Press one of DISC 1 ~ 5 buttons or
DISC SKIP to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while “AL” appears in the
display.
To program all the MP3 audio tracks on an
album at once, press ALBUM +/–
repeatedly until the album you want appears
in the display, then proceed to step 5.
4
Press . or > (or – . or > + on
the remote) repeatedly until the track
number you want appears in the
display.
The total playing time flashes in the display.
When programming an MP3 audio track,
press ALBUM +/– to select album, then
press .
or > (or –. or >+ on
the remote) repeatedly until the track
number you want appears in the display.
5
Press PLAY MODE.
The track(s) is (are) programmed.
The program step number appears,
followed by total playing time.
6
Program additional discs or tracks.
7
Press NX (or N on the remote).
Program Play starts.
Other operations
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
NX (or N on the remote) to play the same
program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Creating your own
program
— Program Play
EFFECT
X-GROOVE j
1 3 4 5 2
PGM
Disc tray
number
Total playing
time (including
selected track)
Track
number
To program Repeat steps
Other discs 3 and 5
Other tracks on the
same disc 4 and 5
Other tracks on
other discs 3 to 5
To Do this
Cancel Program
Play Press PLAY MODE repeatedly
until “PGM” disappears from the
display.
Clear a track from
the end Press CLEAR on the remote
when the playback is stopped.